This is from Quest technical support :
if you want to improve the speed of vreplicator :
Upgrade the HW for the Virtual Appliance from v4 to v7.
Upgrade the VA to 2 Gig Ram
Upgrade the VA 2 CPU
Remove and re-add nic from Flexible to E1000 on the VA
This should improve the replication speed.
Test the following link :
http://{servername} /sdata/{crminstallname}j/sagecrm/-/$schema
If you received an error : Application Error or Runtime.
In IIS,
Activate all the Web Service Extention CGI / ISAPI
Reinstall the CRMRewriter
Open a command Prompt :
go to your Sage CRM Install Dir
cd tomcatbin
Type :
tomcat6 //DS//crmtomcat6
Reinstall : Program Files / IIS Aliases, Reinstall your Patch (SP1, Patch Number …)
If you have any issue with VMware Tools after a P2V convertion, you need to verify if the folder redirection is enable, if yes update all those registry key if they have a UNC path :
HKEY_CURRENT_USEREnvironnement
TEMP AND TMP
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerUser Shell Folder
Check all the key and update all.
Start, Run, cmd
Type
set devmgr_show_nonpresent_devices=1
hit Enter
type devmgmt.msc hit enter
In the Device Manager window
Click on View/Show hidden devices/
Remove everything that is not useful
**Useful after a P2V in Vmware
Click “Start,” then “Control Panel.”
Double-click the “Network Connections” icon. Right-click any one of the Local Area Connection (LAN) icons in the Network Connections window.
Select “Properties” in the menu that pops up. Locate the “HP Network Configuration Utility” option in the list of services and left-click it.
Click the “Uninstall” button that pops up in the Properties window. The HP Teaming Software will begin to remove itself from your system.
Click “Yes” when prompted to restart your computer after the uninstallation has completed.
Do not connect the cable before doing those command because you can create a network storm (a loop and down your network)
Login to the switch with telnet
telnet ip_of_the_switch
type :
configure
Active the LACP
interface port_number lacp active
ie : interface 1 lacp active
setup the trunk
trunk port_number trunk_number mode
ie : trunk 1 trk1 lacp
Repeat those 2 last line for Each port in the same port
Do those command on both switches
Have Fun
Here is the software i use for the graceful shutdown of ESXi boxes.
Choose accept and it will dnload the rpm…
Main page